Oceanographic measurements conducted on voyage 1 of the Aurora Australis of the 1999-2000 season. These data comprise CTD (Conductivity, Temperature and Depth) and ADCP (Acoustic Doppler Current Profiler) data. These data were collected by Mark Rosenberg. This metadata record was completed by AADC staff when the data were discovered bundled with acoustics data during a data cleaning exercise. Basic information about voyage 1: Polynya study off Mertz Glacier at about 145 deg E. The vessel departed from Port Arthur for the polynya study site without returning to Hobart. The voyage also deployed moorings and delivered biologists (for seal and penguin programs) and a small quantity of essential supplies and mail to Macquarie Island. Leader: Dr Ian Allison Deputy Leader: Dr Tony Worby Cargo Supervisor: Dr Vicky Lytle See the readme files in the downloads for more information.

Metadata record for data from ASAC Project 2720 See the link below for public details on this project. The overall objective is to characterise Southern Ocean marine ecosystems, their influence on carbon dioxide exchange with the atmosphere and the deep ocean, and their sensitivity to past and future global change including climate warming, ocean stratification, and ocean ... acidification from anthropogenic CO2 emissions. In particular we plan to take advantage of naturally-occurring, persistent, zonal variations in Southern Ocean primary production and biomass in the Australian Sector to investigate the effects of iron addition from natural sources, and CO2 addition from anthropogenic sources, on Southern Ocean plankton communities of differing initial structure and composition. These samples were collected on the SAZ-SENSE scientific voyage of the Australian Antarctic Program (Voyage 3 of the Aurora Australis, 2006-2007 season). SAZ-SENSE VOYAGE AU0703 ADCP DATA * The complete ADCP data for cruise au0703 are in the files: au070301.cny (ascii format) a0703dop.mat (matlab format) * The "on station" ADCP data (specifically, the data for which the ship speed was less than or equal to 0.35 m/s) are in the files: au0703_slow35.cny (ascii format) a0703dop_slow35.mat (matlab format) * The file bindep.dat shows the water depths (in metres) that correspond to the centre of each vertical bin. * The data are 30 minute averages. Each 30 minute averaging period starts from the time indicated. (so, e.g., an ensemble with time 120000 is the average from 120000 to 123000). * ADCP currents are absolute - i.e. ship's motion has been subtracted out. * Note that the top few bins can have bad data from water dragged along by the ship. * Beware of data when the ship is underway - it's often suspect. * Important data quality information can be found in the data report referenced above. * The figure a0703difship30.eps shows the speed difference between vertical bin 2 and all other bins, where the data have been divided up into different speed classes for ship speed. The apparent vertical shear for bins ~1-10, and below bin ~40, is an error, possibly due to acoustic ringing from an air/water interface in the seachest. Data where ship speed is 0 to 1 m/s does not show this error.

Oceanographic measurements conducted on voyage 6 of the Aurora Australis of the 2000-2001 season. These data comprise CTD (Conductivity, Temperature and Depth) and ADCP (Acoustic Doppler Current Profiler) data. These data were collected by Mark Rosenberg. This metadata record was completed by AADC staff when the data were discovered bundled with acoustics data during a data cleaning exercise. Basic information about voyage 6: The voyage will complete a range of Marine Science activities off the Mawson Coast, and off the Amery Ice Shelf before calling at Davis to retrieve summer personnel and helicopters prior to returning to Hobart. Science equipment calibration will be undertaken at Mawson. (Marine Science activities were interrupted when the Aurora Australis was required to provide assistance in the Polar Bird's attempt to reach Casey, complete the station resupply and return to open water.) Leader: Dr Graham Hosie Deputy Leader: Mr Andrew McEldowney See the readme files in the downloads for more information.

A 600KHz Teledyne RDI Workhorse Sentinel ADCP was deployed through a 10inch auger hole, flush with the base of the ice, looking downwards. At ice stations 2, 3, and 4 the deployment locations was Ridge site 1, the ridge site closest to the ship. At ice station 7 there were 4 different deployment locations: - Transducer Hole A, by active ridge on 6th October 2012; - Trace Metal / Bio Site; - 100m Core site of ice-physics transect; - Transducer Hole A, re-drilled on 7th October 2012. Length of deployment varies from stations to station and was limited by AUV operations, when our ADCP was switched off. Files contain the data collected in raw format. This format can be read by Teledyne WinSC software. Data files are stored in folders by ice station (see below).

Oceanographic measurements conducted on voyage 7 of the Aurora Australis of the 2001-2002 season. These data comprise CTD (Conductivity, Temperature and Depth) and ADCP (Acoustic Doppler Current Profiler) data. These data were collected by Mark Rosenberg. This metadata record was completed by AADC staff when the data were discovered bundled with acoustics data during a data cleaning exercise. Basic information about voyage 7: Subject to ice conditions, the voyage will undertake a range of Marine Science activities in the Prydz Bay area and will retrieve summer personnel, helicopters and limited RTA cargo from Davis station. Leader: Mr Rob Easther Deputy Leader: Ms Gerry Nash See the readme files in the downloads for more information.

Oceanographic measurements conducted on voyage 7 of the Aurora Australis of the 2002-2003 season. These data are ADCP (Acoustic Doppler Current Profiler) data. These data were collected/collated by Mark Rosenberg. Final ADCP data for voyage au0201 (SAZ mooring turnaround and iceberg B9B experiment), Aurora Australis Voyage 1 2002/2003, 17th Oct 2002 to 18th Nov 2002. * The complete ADCP data for cruise au0201 are in the file: au020101.cny (ascii format) a0201dop.mat (matlab format) * The "on station" ADCP data (specifically, the data for which the ship speed was less than or equal to 0.35 m/s) are in the files: au0201_slow35.cny (ascii format) a0201dop_slow35.mat (matlab format) * The file bindep.dat shows the water depths (in metres) that correspond to the centre of each vertical bin. * The data are 30 minute averages. Each 30 minute averageing period starts from the time indicated. (so, e.g., an ensemble with time 120000 is the average from 120000 to 123000). * ADCP currents are absolute - i.e. ship's motion has been subtracted out. * Note that the top few bins can have bad data from water dragged along by the ship. * Beware of data when the ship is underway - it's often suspect. MATLAB VECTORS AND MATRICES: ============================ header info ----------- for header info: column number corresponds to 30 minute average number botd = mean bottom depth (m) over the 30 minute period cnav = GPS info: don't worry about it cruise = cruise number date = ddmmyy (UTC) ibcover = a bottom track parameter: don't worry about it icover = percentage of 30 minute averageing period covered by acceptable 3 minute ensembles lastgd = deepest accepted bin in this profile lat = mean latitude over the 30 minute period (decimal degrees) lon = mean longitude over the 30 minute period (decimal degrees) nbins = no. of bins logged (=60) shipspeed = scalar resultant of shipu and shipv shipu = ship's E/W velocity over the ground over 30 minute period (m/s, +ve east) shipv = ship's N/S velocity over the ground over 30 minute period (m/s, +ve north) time = hhmmss, time (UTC) at start of 30 minute averageing period dectime = time in decimal days from start of year 2002 (e.g. midday on January 2nd = 1.5000) adcp data --------- for adcp data matrices: row number corresponds to bin number column number corresponds to 30 min. average no. bindep = depth (m) to centre of each bin in the profile (will be the same for all profiles) ipcok = percentage of the profile period for which there was good data in this bin (N.B. data=NaN when ipcok=0) qc = a quality control value for each bin - see below speed = scalar resultant of u and v u = east/west current (m/s, +ve east) v = north/south current (m/s, +ve north) ASCII FORMAT FILE: ================== * The file starts with a 3 line header. * Then comes each 30 min. ensemble, as follows: First, a 1 line header, containing date (UTC) (dd-mmm-yyyy) time (UTC) (hh:mm:ss) % of 30 min average covered by acceptable 3 min. ensembles deepest accepted bin in the profile ship's E/W velocity over the ground over the 30min (m/s) ship's N/S velocity over the ground over the 30min (m/s) P= GPS position-derived velocity (D=direct GPS vel.; B=bottom track vel.) mean longitude over the 30 min. mean latitude over the 30 min. % of interfix period for which there was bottom depth information mean bottom depth over the 30 min. 0 0 Next, the data, from the shallowest bin to the deepest bin: for each bin, there's 4 parameters: u = east/west current (m/s, +ve east) v = north/south current (m/s, +ve north) qc = quality control value - see below ipcok = percentage of the profile period for which there was good data in this bin Note that the data are written left to right across each line, then onto the next line, etc. (so 4 bins on a full line) quality control value: ---------------------- qc = %good / (Verr+0.05) where: %good = percent good pings after logging system screening Verr = RMS error velocity (m/s). Possible range of qc is 0-20, with an expected range of 0-10; values of 0-4 indicate very poor data; values above 8 indicate very good data.

This dataset contains time-series of current profiles from beneath the Amery Ice Shelf obtained from an Acoustic Doppler Current Profiler (ADCP) (RDI 300 kHz broadband Workhorse) on the AM06 mooring string. The ADCP was positioned ~108 m below the base of the ice shelf and oriented to look upwards (i.e. toward the base of the shelf) to examine the water cavity boundary layer and the range (distance) from the instrument to the ice-ocean interface. Accounting for instrument displacement by ocean currents, changes in range are expected to be indicative of basal melting. The dataset contains ~1 year of velocity data from 07/01/2010 sampled at 30 minute intervals. In the vertical, the ADCP sampled 27 bins, with a measurement every 4m. Key variables in the dataset include ocean velocity (u, v, w), instrument orientation (pitch, roll, heading) and distance from the instrument to the ice shelf base (btdistance), as well as quality control parameters such as beam correlation (avbeamcor), strength of the return/echo amplitude (ampav) and velocity error (errv). Two data files are archived here, the raw data "adcp_am06_1noqc.nc" and the quality-controlled data "adcp_am06_1qc.nc". Descriptions of the quality control and post-processing are found in "readme.rtf" and notes and preliminary plots are found in "borehole2010_11.pdf".

Acoustic Doppler current profiler (ADCP) measurements from a hull mounted 150 kHz narrow band ADCP unit were collected in the Southern Ocean from 1994 to 1999, on the following cruises: au9404, au9501, au9604, au9601, au9701, au9706, au9807 and au9901. The fields in this dataset are: Currents bottom depth cruise number ship speed time velocity GPS

---- Public Summary from Project ---- This project is designed to provide an understanding of the interactions between krill, other zooplankton, the physical environment and the predators dependent on krill. This will directly address a number of pressing problems facing CCAMLR (the Commission for the Conservation of Antarctic Marine Living Resources) in its attempts to manage the krill fishery using an 'ecosystem approach'. Expected outcomes: As a result of logistic operations (i.e. diversion to Casey) the 29 days on site allocated to this work was reduced to 10 days. Hence only a fraction of the intended program of work was conducted. Acoustics: Acoustics data (for 38, 120, 200kHz) was collected for the top 250m of the water column for nine and a half of the planned 13 transects in our 60 x 60 nautical mile survey region.

The Davis Aerodrome Project (DAP) collected a range of environmental survey data over several field seasons to support a comprehensive environmental assessment of the proposed aerodrome. This data includes flora, fauna, soils, lake ecosystem, nearshore, marine, air quality and meteorological information which has been collected by a number of different methods, and extends across the current Davis Station, proposed aerodrome and supporting infrastructure footprint (Ridge Site), previous sites considered for the aerodrome (Heidemann Valley, Adams Flat), as well as locations across the Vestfold Hills away from any of the proposed developments.(this text is standard for all DAP datasets being added to the AADC). This dataset contains short-term nearshore marine current profile data collected to inform environmental assessment processes related to the Australian Antarctic Division’s DAP and Davis Masterplan projects. Eight current meter deployments were undertaken across six sites in the nearshore marine environment in the vicinity of Davis Research station. Deployment periods ranged from three days (3 x 24hr tide cycle) to two weeks. Sites were selected based on the location of previous sampling activity (CM1-5) and sites of interest to Davis Aerodrome and Davis Masterplan projects with regard to proposed future developments in the area. A second deployment was undertaken at two key sites to increase the sampling interval at each. Data was collected using a Nortec Aquadopp Profiler 1 MHz. The same instrument was used to collect current profiles at all sites. The instrument was deployed through a 40cm hole drilled through the seaice. It was suspended horizontally in the water column (mid-way between the seafloor and the under surface of the ice) by a bridal attachment and rope secured at the surface (see figure below). A 15cm fin was attached to the base of the instrument for all deployments. In shallow locations the instrument was positioned so that it could not hit the seafloor throughout the lowest tidal cycle during the deployment. The profile interval was set to record every 900 seconds (15min) for a period of 120 seconds (2min). All instrument settings and recording details are contained in the hdr files saved in each data folder. Start and end dates and times are set out in the “current meter deployment details” spreadsheet. Temporal coverage Site No. Deployment Date Retrieval Date CM1 22/10/2021 2/22/2021 CM2 16/09/2021 19/09/2021 CM2 9/10/2021 22/10/2021 CM3 3/11/2021 12/11/2021 CM5 24/11/2021 4/11/2021 ML 8/12/2021 14/12/2021 OptionA 29/09/2021 2/10/2021 OptionA 14/12/2021 20/12/2021 Spatial coverage CM2_01_20210919 68.57399536 77.96031373 OptionA_01_20211002 68.57597253 77.96121253 CM2_02_20211022 68.57399536 77.96031373 CM1_01_20211102 68.57749077 77.95758156 CM3_01_20211112 68.57276237 77.94873464 CM5_01_20211204 68.58321738 77.9180513 ML_01_20211214 -68.58381482 77.94507546 OptionA_02_20211220 68.57585945 77.96151685